Is the KPC-CC01 just the keypad or does it come with a cable? Also, how do I use this with the MS300 or C2000?

The MS300 drive’s standard keypad is KPMS-LE01, but you can also use KPC-CC01 with MS300 or C2000 drive if you like.
For KPC-CC01, you need a standard off the shelf, Ethernet CAT5 straight cable between KPC-CC01 and drive’s RJ45 port.
Also, remember to set the following parameters on the MS300 to communicate with the KPC-CC01:

• 09-01 to 19.2
• 09-04 to 13

Note: There is no manual for the KPC-CC01. Please refer to the MS300 and C2000 manuals for details on using this keypad.